ASROCK 960GC-GS FX Manuel d'utilisateur télécharger pdf (Page 29)

2.11.2 Installing Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

Vista

64-bit With RAID Functions

If you want to install Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

/ Vista

64-bit on a

RAID disk composed of 2 or more SATA / SATA2 HDDs with RAID functions, please

follow below steps.

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen Storage Conguration.

B. Set the “SATA Operation Mode” option to [RAID].

STEP 2: Use “RAID Installation Guide” to set RAID conguration.

Before you start to congure RAID function, you need to check the RAID installation

guide in the Support CD for proper conguration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 3: Install Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

/ Vista

64-bit OS on

your system.

STEP 3: Use “RAID Installation Guide” to set RAID conguration.

Before you start to congure RAID function, you need to check the RAID installation

guide in the Support CD for proper conguration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 4: Install Windows

XP / XP 64-bit OS on your system.

After step 1, 2, 3, you can start to install Windows

XP / XP 64-bit OS on your

system. At the beginning of Windows

setup, press F6 to install a third-party RAID

driver. When prompted, insert the SSATA / SATA2 driver diskette containing the

AMD RAID driver. After reading the oppy disk, the driver will be presented. Select

the driver to install according to the OS you install.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Pas de commentaire

ASROCK 960GC-GS FX Manuel d'utilisateur Page 29