ASROCK A55iCafe Manuel d'utilisateur télécharger pdf (Page 34)

2.14.2 Installing Windows

7 / 7 64-bit / Vista

/ Vista

64-bit With

RAID Functions

If you want to install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit on a RAID disk

composed of 2 or more SATA / SATAII HDDs with RAID functions, please follow

below steps.

STEP 1: Set up UEFI.

A. Enter UEFI SETUP UTILITY Advanced screen Storage

Conﬁ guration.

B. Set the “SATA Mode” option to [RAID].

STEP 2: Use “RAID Installation Guide” to set RAID conﬁ guration.

Before you start to conﬁ gure RAID function, you need to check the RAID installation

guide in the Support CD for proper conﬁ guration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 3: Make a SATA / SATAII Driver Diskette.

Make a SATA / SATAII driver diskette by following section 2.14.1 step 2 on page 33.

STEP 4: Install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit OS on your

system.

STEP 3: Use “RAID Installation Guide” to set RAID conﬁ guration.

Before you start to conﬁ gure RAID function, you need to check the RAID installation

guide in the Support CD for proper conﬁ guration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 4: Install Windows

XP / XP 64-bit OS on your system.

After step 1, 2, 3, you can start to install Windows

XP / XP 64-bit OS on your

system. At the beginning of Windows

setup, press F6 to install a third-party RAID

driver. When prompted, insert the SATA / SATAII driver diskette containing the AMD

RAID driver. After reading the ﬂ oppy disk, the driver will be presented. Select the

driver to install according to the OS you install.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 62 63

Pas de commentaire

ASROCK A55iCafe Manuel d'utilisateur Page 34