ASROCK K10N78-1394 Manuel d'utilisateur télécharger pdf (Page 29)

2929

2.7 HDMI Audio Function Operation Guide2.7 HDMI Audio Function Operation Guide

2.7 HDMI Audio Function Operation Guide

The DVI-D port for the chipset adopted on this motherboard can support DVI/HDCP

and HDMI format signal. You may use the DVI to HDMI adapter to convert the DVI-D

port to HDMI interface. Please follow below steps to enable HDMI audio function

according to the OS you install.

For Windows

XP / XP 64-bit OS

For Windows

Vista

/ Vista

64-bit OS

Step 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen Chipset Configuration.

B. Set the option “OnBoard HDMI HD Audio” to [Auto].

Step 2: Install HDMI audio driver to your system.

Install “Onboard HDMI HD Audio Driver” from ASRock Support CD to your system.

Step 3: Reboot your system.

After you reboot the system, the HDMI audio function is available.

Step 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen Chipset Configuration.

B. Set the option “OnBoard HDMI HD Audio” to [Auto].

Step 2: Enter Windows

to set up your system manually.

A. Click “Start” button, select “Settings”, and then click “Control Panel”.

B. Click “Hardware and Sound”, and click “Sound”.

C. Change the default setting “Speaker” to “Digital Output Device (HDMI)”.

D. Click “OK” to finish the setting.

Step 3: Reboot your system.

After you reboot the system, the HDMI audio function is available.

1. DVI to HDMI adapter is not bundled with this motherboard, please

refer to the adapter vendor for further information.

2. If you install the DVI-D monitor instead of the HDMI monitor on this

motherboard and enable HDMI audio function, the film you play

may pause sometimes.

After HDMI audio driver is installed, the OS default will output the audio

signal through HDMI audio. Therefore, the onboard audio jack will not

function.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Pas de commentaire

ASROCK K10N78-1394 Manuel d'utilisateur Page 29