ASROCK A75 Pro4/MVP Manuel d'utilisateur télécharger pdf (Page 45)

2.17.2 Installing Windows

7 / 7 64-bit / Vista

/ Vista

64-bit With

RAID Functions

If you want to install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit on a RAID disk

composed of 2 or more SATA3 HDDs with RAID functions, please follow below

steps.

STEP 1: Set up UEFI.

A. Enter UEFI SETUP UTILITY Advanced screen Storage

Conguration.

B. Set the “SATA Mode” option to [RAID].

STEP 2: Use “RAID Installation Guide” to set RAID conguration.

Before you start to congure RAID function, you need to check the RAID installation

guide in the Support CD for proper conguration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 3: Make a SATA3 Driver Diskette.

Make a SATA3 driver diskette by following section 2.17.1 step 2 on page 44.

STEP 4: Install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit OS on your

system.

STEP 3: Use “RAID Installation Guide” to set RAID conguration.

Before you start to congure RAID function, you need to check the RAID installation

guide in the Support CD for proper conguration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 4: Install Windows

XP / XP 64-bit OS on your system.

After step 1, 2, 3, you can start to install Windows

XP / XP 64-bit OS on your

system. At the beginning of Windows

setup, press F6 to install a third-party RAID

driver. When prompted, insert the SATA3 driver diskette containing the AMD RAID

driver. After reading the oppy disk, the driver will be presented. Select the driver to

install according to the OS you install.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 67 68

ChriseNego 26 Apr 2024 | 22:20:27

Hello, im noob :)

ASROCK A75 Pro4/MVP Manuel d'utilisateur Page 45